How to Easily Get Rid of Weeds in Block Paving?
19 Sep 2022
Block paving is an attractive, durable choice for driveways, but it also tends to collect weeds more than asphalt or concrete driveways.
If you are looking for ways to fight weeds in block paving, then there are some measures you can take to say goodbye to weeds in your block paving driveways once and for all!
This article will give you five simple tips on how to get rid of weeds in block paving driveways once and for all. Follow these tips today and you’ll be well on your way to having weed-free block paving in no time!
1) Use salt and hot water
This technique is effective because salt water gets into the cracks between the blocks, which is where weeds usually grow. To kill weeds using this method, dissolve 1 tablespoon of salt in a quart of hot water.
Pour it onto the surface of the block paving and let it sit for 15 minutes. Blot with a paper towel if there are excess droplets on top. Rinse thoroughly with fresh water to remove all traces of salt from the surface.
2) Pressure washing
A pressure washer is a common tool for cleaning all sorts of things. But, it also has many other uses including removing weeds from block paving. Basically, it’s a way of generating high-pressure water jets which can blast away dirt and grime from objects such as driveway slabs, paving or steps.
3) Try vinegar and baking soda mixture
A natural and chemical-free way to get rid of weeds is by using vinegar and baking soda. The process is quick, too! Pour the vinegar over the weed and let it soak into the ground for about an hour. Now spread a layer of baking soda onto the affected area. Give it a little bit of time before you start shoveling or sweeping away the sludge on top of it.
4) Remove weeds manually
One of the best ways of tackling weeds in block paving is by removing them manually. You will need some gloves, a trowel and then get started removing them using your fingers, the trowel or even a piece of wood. This way of removing weeds from block paving will be difficult if there are more than one weed because they can become hard to get at.
5) Baking soda
Mix a mixture of water and baking soda together in a bucket. Make sure it’s thick enough so it doesn’t drip through the cracks. Once you are satisfied with the consistency, pour this onto your driveway liberally. Let it sit for 5-10 minutes before scrubbing with a brush. Rinse and repeat!
6) Power wash
Consider power washing your driveway if you want to get rid of pesky weeds. Be sure not to overdo it, though, and make sure the water won’t seep into the ground underneath. Otherwise, use the lowest setting that will do the job and scrub from one side of the driveway to another until all the weeds are gone.
Conclusion
So if you are struggling with weeds in your driveway or on the pavement, try these tips without any fear. You will be able to remove even the most stubborn weeds from the block paving surface.